s Fixing a Faucet Aerator: You CAN be a DIY'r too! - The Kim Six Fix
What is New?

Fixing a Faucet Aerator: You CAN be a DIY'r too!

If you aren't a fellow DIY'r (or if you think you don't have the skills or desire to do simple repairs or improvements in your house) don't stop reading!  Trust me.. once you see how easy it really is, how much  money you can save doing it yourself, and how great it comes out when you are through you are going to be empowered too.  

A lot of women I talk to are afraid to tackle projects at home and often lament that it is "their husband's area of expertise." But I know if I waited for my husband to get around to a 'Honey Do' list I would die before it happened.  And that is how I got started blogging about home improvement.  I bought a house.. it needed a LOT of improvement.. and I had no money and nobody else willing to do it.  It was up to me.

My number one piece of advice for anyone thinking about tackling a project but freaking out because they feel clueless is this: 
DON'T BE AFRIAD!  

With the exception of a few things (like electricity), a home improvement project (even if you screw it up) will not kill you.  You can do this! 

I laugh when I hear on someone hiring "unskilled labor" to do a home repair.  If it is UNSKILLED surely I can handle it, I have an advanced degree for crying out loud! This isn't brain surgery.. it is painting a wall, fixing a toilet, hanging some shelves... 

And if you aren't sure what you are doing, that isn't a reason to not try.  There are so many people out there who are willing to help you, just ask.  Hardware stores aren't just for boys anymore!  Don't be intimidated.  

image source


I always remind myself (when I begin freaking out that I am in over my head) that *IF* I mess something up, there will always be someone I can call to fix my mistake.. nothing is forever.  No guts, no glory! (Although I can say that I have NEVER EVER needed to have someone repair damage I have caused attempting a project.  NEVER.  Somehow it has always worked out in the end.)

So jump right in.  Inspired by something on Pinterest?  DO IT!
Something not working around the house and it is driving you nuts?  GOOGLE IT! 

YOU CAN DO THIS.. DON'T BE AFRAID! 

Pep talk over.  Time to talk DIY!  How 'bout Plumbing?!

Since we moved into our current house, the powder room faucet has always sprayed crazily.   An explosion of water in all directions (I didn't even know water could do an 180 degree turn, but it can!)   I have spent the last 6 months of my life wiping water stains off the mirror.  My husband told me to call a plumber and have the faucet replaced.

Umm.. yeah. No.  That would cost at least $50 for a new fixture and a couple hundred dollars for labor.  l decided to take it apart to figure out what was wrong with it (Remember, you could always call a plumber if you can't figure out what is wrong.. but there is no need to call him first!)


To take apart a faucet, you just need to unscrew the spout to get at the "guts."  If you can't get it to unscrew with just your fingers, you can use a pliers to loosen it: 


Once it is loose, remove it completely (make sure you close the sink drain so nothing gets lost!)



In my case I immediately realized what the problem was:  The aerator was missing:

Ah Ha!   Off to the hardware store!
When selecting a new aerator there are TONS and TONS of choices.  DON'T BE AFRAID!
It may be intimidating, but it isn't impossible.
When doing a repair project, it is always best to take exactly what you are fixing with you.  It will make selecting the right replacement part much easier (and if you are lost, you can always hold up the part to an employee and say "what is this and how can I fix it?")
Here are all the parts of my faucet spout:
It turns out when repairing a faucet aerator there are a few things you need to know:
How big is the spout and how is it threaded?
What flow rate do you want (how much water comes out)?
What type of flow do you want?

You don't know the answers?  Ask for help!   

Question 1: How big is the spout and how is it threaded?  
Well, lookie that.. Home Depot gives you a handy dandy cheat sheet right there in the store:

In my case it turns out that I had a 15/16 inch (27 thread count) spout.
That sign actually says "90% of faucet spouts are 15/16" Well, whoda' thunk! My faucet is average. 

Question 2: What flow rate do you want? 
My spout (like most) had the flow rate printed on it: 2.2 GPM (gallons per minute.)  Because we live where water is pretty valuable, and because the powder room is where my kids wash their hands (AKA play in the water) I decided I wanted to cut down on the flow rate.   Low-flow aerators range from 1-1.5 GPM.  I settled on a 1.5 GPM replacement.

Question 3: What type of flow do you want? 
Well, in my case I wanted ANYTHING that wasn't "spray all over every surface."  However, if you are pickier than me, you can once again count on Home Depot to show you your options:
I decided on aerated, since that is typical for a bathroom faucet.  This is all personal preference.

Now that I know what I need, I find it on that giant wall of faucet parts**.  Here is what I buy (Notice the three yellow circles indicate the answers to the three questions we just answered):
Total cost: $4.89 (take that extra $200 you saved and buy some shoes!)

When you get it out of the package you can clearly see difference between it and the one that wasn't working correctly.  This one has a screen to keep the water aerated.
Before you put it back on your faucet want to make sure you assemble all the parts in the correct order (there is a diagram on the packaging):
Now screw it back onto the faucet and you are DONE!  That is all there was to it. 

Stand back admire your handy work:


A splatter free faucet. 

Now get out there and tackle those projects!  Don't be afraid! 
Pin It


**Another option was to buy just the plastic insert and reuse the metal spout that was originally on my faucet. My home depot was sold out of the small inserts that fit, so I settled on an entirely new spout. 



This post was originally written as a guest post for Andrea at Good Girl Gone Redneck.

Share this:


I recently removed Disqus comments and converted to the Facebook commenting system.
Thank you for your understanding.

6 comments :

  1. You are definitely one of my favorites. I especially loved the pep-talk at the beginning because I am one of the "ohhh, I don't know how to do that" kind of people. So, thanks for encouraging us to get up our gumption and go for it! Good job repairing the faucet yourself. :o)

    ReplyDelete
  2. You are right and I'm always like - how do you do that, can I do it? I have painted and wallpapered and will put tiles on my laundry room wall next ... I love how you encourage everyone to try something new.
    Jule

    ReplyDelete
  3. Very good article I enjoy your website

    ReplyDelete
  4. You are so handy! Now if only I had known this last year when my kitchen sink dribbled water for 6 months!!

    ReplyDelete
  5. Good tip at the end - one of the most important things when doing this kind of DIY that you've never done before is - if you disassemble something, lay it out on paper exactly how it was assembled, or draw a picture! So many times I've taken apart a complex appliance thinking it would be obvious which order and where bits have to go back in, and no it isn't ;)

    ReplyDelete
  6. That is one decent faucet. I like its style.
    Air Temperature Specialists

    ReplyDelete

Thanks for your comments. I try to get back to anyone with a question.. so please make sure to leave an email address if you want a reply!







 
Copyright © 2017 The Kim Six Fix. Proudly Blogging on Blogger